Unprecedented Rigidity and Accuracy - Ultimate Hybrid Structure
- Super-wide slideways (X- / Y-axis) to minimize quadrant projection
- High-rigidity roller guides (Z-axis)
- Optimized column shape substantially reduces thermal displacement
Best Chip Disposal Solution in the Industry
- Coolant tank for collecting casting sludge (option)
- Through-spindle coolant system (unit on coolant tank) <option>
- Chip conveyor (internal, spiral type) <option>
Pursuit of usability
- Accessibility - excellent access to the table and a wide door opening
- Loading and unloading with a crane - the ceiling part also opens
- By changing the spindle unit to a complete unit, which also includes the rear bearing units, we were able to reduce the spindle replacement time.
Lot 1 - DMG Mori NTX 1000 CNC High-Precision High-Efficiency Integrated Mill Turn Centre (2014)
Description:
CNC Milling Machine – Milling is a process performed with a machine in which the cutters rotate to remove the material from the workpiece present in the direction of the angle with the tool axis. DMG Mori has 7 types of CNC milling machines, and as one of the world’s leading manufacturers of machine tools,. Coolant tank Shower coolant OP Semi dry unit OP A high capacity coolant tank comes as a standard feature. As well as preventing chips from scattering during machining, this allows them to fall smoothaly into the center conveyor. Tank capacity 345 L (91.1 gal.) Misting device Supplies air and oil mist to the cutting tip. Removes oil rising to the surface of the coolant in the coolant tank by attaching to a revolving belt, preventing deterioration of coolant. Suitable for water-soluble coolant. The belt is made of polyurethane. Please avoid using coolant containing alkaline cleaning fluid. Air blow for chuck (spindle 1). Coolant tank for collecting casting sludge (option) Through-spindle coolant system (unit on coolant tank) Chip conveyor (internal, spiral type) Pursuit of Usability Dmg Mori 5100 Cat40 Pull Studs. Accessibility - excellent access to the table and a wide door opening; Loading and unloading with a crane - the ceiling part also opens. Is the cutting fluid in your coolant tank full of oil and chips? Worse yet, is it beginning to stink from the effects of bacterial infestation?
* The purchaser shall at it's own costs be responsible for disconnecting, dismantling and removing items purchased from the auction location. If the purchaser is intending to export items purchased at the auction it shall be responsible at its own cost for ensuring compliance with all UK export conditions and the obtaining of any applicable Export Licences.
* Please note all dimensions stated are approximate, however the accuracy cannot be guaranteed and should be verified by the bidder before bidding.
Specifications:
The specifications given are to the best knowledge of the auctioneer. However, the accuracy is not guaranteed and should be verified by the buyer prior to bidding.
Spindle 1 through-spindle hole dia. 73 mm (Bar work capacity dia. 65 mm)
This specification changes the spindle 1 to the spindle unit with the bar work capacity dia. 65 mm. Chuck and cylinder for the spindle 1 is not included in this specification.
Output (30 min/continuous): 11 / 7.5 kW Maximum spindle speed: 5000 min-1 Maximum torque (30 min/continuous): 172/158 N・m Spindle through hole diameter: φ73mm Bar work capacity: φ65mm
Mori Dmg 5100 Coolant Tank Cleaning
(Spindle 1) 8' Hollow Chuck Unit BB208A621 (Wo body)
(Spindle 2) Kitagawa 5' Solid Chuck N-05 + M1120HC21D (w/o chuck body)
(HSC option) High-speed tool spindle 20,000 min-1, 9/ 5.5 kW (Capto C5)
This specification is effective to increase circumferential speed when using small-diameter tools.
・Output (25%ED/ countinuous): 9.0/ 5.5 kW
・Max. spindle speed: 20,000 min-1
・Max. torque (15%ED/ 25%ED/ coutinuous): 49.4/ 36.7/ 19.1 Nm
Tool storage capacity 76 tools (Capto C5)
An option to increase the tool storage capacity and change the tool holder grip and retention knob.
Coolant flow switch for through-spindle coolant system
It detects if the coolant is flowing in the piping. An alarm sounds when the flow amount becomes less than the set level for a specified time, and then halts the machine. It is effective to avoid impairing the machining accuracy caused by lower volume of coolant supply.
Super-high-pressure coolant system I/F (7.0 MPa)
This I/F is for mounting the high-pressure coolant system (separate type) on the machine. Including the electrical components and coolant piping.
Mist collector I/F (duct only, dia. 150 mm ) (HVS-150)
A duct for the mist collector will be installed on the machine.
Oil skimmer
Removes oil rising to the surface of the coolant in the coolant tank by attaching to a revolving belt, preventing deterioration of coolant.
Suitable for water-soluble coolant.
The belt is made of polyurethane. Please avoid using coolant containing alkaline cleaning fluid.
NK. Syst
Air blow for chuck (spindle 1)
The air blow removes chips adhering to the chuck. This prevents loss of gripping accuracy caused by chips caught in the machine.
The air blow for the spindle (chuck) is controlled by M codes in the program.
The air blow is turned on by M51, and off by M59. It is also possible to set a timer, so that it turns off after a specified time.
It can also be turned on and off with the air blow button on the flat panel.
※ The spindle can be jogged during air blow (using the parameter settings).
Air blow for tool tip (tool spindle)
The air blow removes chips adhering to the tool tip.
The air blow is controlled by M codes in the program. The air blow is turned on by M458, and off by M459.
Chip conveyor (right discharge, hinge type + scraper type with drum filter type)
The chip conveyor is equipped with two types of conveyors - hinge type and scraper type.
This allows the chip conveyor to dispose chips consisting of various materials and different lengths.
A built-in drum filter with backwash system can reduce the frequency of cleaning inside the tank.
- Height of the discharge port
- Not European Norm compliant: 1,064 mm
- European Norm compliant: 1,026 mm
- Long chips: 1,137 L/h
- Short chips: 55 L/h
- Coolant discharge volume (water-soluble coolant): Max. 150 L/min
ConSep2000 (TSUBAKIMOTO MAYFRAN INC.)
Bar feeder I/F (LNS) (multiple)
This is the interface for the bar feeder, which increases productivity by feeding bar material automatically.
Bid information
Serial Number: NTX10140906
Location: Reading
Transport information
Mori Dmg 5100 Coolant Tank Cleaner
- Weight: 10240kg
- Other Transport Details: Loading Charge TBC
This page will automatically refresh every 3 seconds. Please consider this when bidding.